IGEA Implant System · Mesa Italia · Titanium Grade 4 · Made in Italy

IGEA IMPLANT SYSTEM

Name: IGEA Implant System
Brand: Mesa Italia

Dental implants in Titanium Grade 4 with SLA surface · 12° conical connection · For dental surgeons and implantologists

CE 0425
ISO 13485
ISO 9001
ASTM F67

WHY THIS PRODUCT

IGEA Implant System is the Mesa Italia dental implant line made of Titanium Grade 4, the commercially pure titanium grade with the highest mechanical strength. It guarantees rapid osseointegration and excellent biocompatibility, thanks to the SLA (Sandblasting and Acid Etching) surface that increases the contact surface and promotes osteoblastic cell differentiation.

Why this product exists: osseointegration is the determining factor for long-term clinical success. The IGEA SLA surface offers optimal and uniform micro-roughness, validated by scientific studies and clinical results, for high clinical predictability. Every step of the surface process is 100% controlled.

The conical connection with internal hexagon balances the loading forces on the prosthetic component, preventing potential screw-loosening phenomena. Made in Italy supply chain with ISO 13485 and ISO 9001 quality system.

WHO IT’S FOR

Dental Surgeons

Professionals seeking a predictable implant with tested SLA surface and reliable conical connection for routine and complex implant procedures.

Implantologists

Specialists requiring a complete implant system with Narrow, Regular and Short diameters to manage every clinical scenario, from anterior areas to insufficient bone cases.

Oral Surgery Centers

Facilities needing a versatile implant with crestal and sub-crestal placement, atraumatic apex and controlled insertion torque (45 Ncm).

DISTINCTIVE FEATURES

Platform Switch

Safeguards peri-implant tissues, preserving crestal bone over time.

12° Conical Connection

Incredibly effective seal thanks to Mesa know-how, balances loading forces and prevents screw loosening.

M2 Prosthetic Screw

Strong and secure, a guarantee for the prosthetic connection.

Machined Collar 0.3

For crestal but also sub-crestal placement, complete clinical flexibility.

SLA Surface

The most widespread, the most tested, the safest. Sandblasting + acid etching for optimal micro-roughness.

Atraumatic Apex

Safeguards adjacent anatomical structures during insertion.

Body Taper Angle 24°

Implant body geometry optimized for primary and secondary stability.

MATERIAL AND SURFACE

Material: Titanium Grade 4 for all Mesa IGEA dental implants. This material guarantees rapid osseointegration, excellent biocompatibility and has the highest mechanical strength among commercially pure Titanium grades.

Cleaning: Mesa Italia performs thorough cleaning processes on all implants through advanced technologies, to eliminate any trace of dirt deriving from industrial manufacturing processes.

SLA (Sandblasting and Acid Etching): the surface treatment performed on Mesa Igea implants involves a sandblasting process followed by acid etching, aimed at increasing the contact surface and promoting osteoblastic cell differentiation.

100% Controlled

Every step of the surface process monitored and verified.

SLA

Sandblasted and acid-etched surface for optimal and uniform micro-roughness.

High clinical predictability

Technology validated by scientific studies and clinical results.

Technical images available in the catalog: Titanium G4 Microstructure, SLA Surface 5.000KX.

COMPLETE TECHNICAL TABLES

Narrow & Regular implants made of Medical Grade 4 Titanium to guarantee biocompatibility and strength. High-precision internal Igea. The use of Igea Narrow implants is recommended in anterior areas.

Diameter 3.5 (Narrow)

D1 mm	D2 mm	L mm	Code
3.5	1.6	8	`Ti4-Igea-1003`
3.5	1.6	10	`Ti4-Igea-1002`
3.5	1.6	11.5	`Ti4-Igea-1001`
3.5	1.6	13	`Ti4-Igea-1004`
3.5	1.6	15	`Ti4-Igea-1005`

Diameter 3.8 (Regular)

D1 mm	D2 mm	L mm	Code
3.8	1.9	8	`Ti4-Igea-1006`
3.8	1.9	10	`Ti4-Igea-1007`
3.8	1.9	11.5	`Ti4-Igea-1008`
3.8	1.9	13	`Ti4-Igea-1009`
3.8	1.9	15	`Ti4-Igea-1010`

Diameter 4.3 (Regular)

D1 mm	D2 mm	L mm	Code
4.3	2.6	8	`Ti4-Igea-1026`
4.3	2.6	10	`Ti4-Igea-1027`
4.3	2.6	11.5	`Ti4-Igea-1028`
4.3	2.6	13	`Ti4-Igea-1029`
4.3	2.6	15	`Ti4-Igea-1030`

Diameter 5.0 (Regular)

D1 mm	D2 mm	L mm	Code
5.0	2.2	8	`Ti4-Igea-1021`
5.0	2.2	10	`Ti4-Igea-1022`
5.0	2.2	11.5	`Ti4-Igea-1023`
5.0	2.2	13	`Ti4-Igea-1024`
5.0	2.2	15	`Ti4-Igea-1025`

IGEA Short Implants (L 6.5 mm)

D1 mm	D2 mm	L mm	Code	Type
3.8	1.9	6.5	`Ti4-IGEA-1034*`	Narrow
4.3	2.2	6.5	`Ti4-IGEA-1035*`	Regular
5	2.6	6.5	`Ti4-IGEA-1036*`	Regular

(*) Cover screw included for IGEA Short implants.

CONSTRUCTION FEATURES

The conical connection with internal hexagon offers the ability to balance the loading forces acting on the prosthetic component, also preventing potential screw-loosening phenomena.

Platform Switch: safeguards peri-implant tissues
12° Conical Connection: incredibly effective seal thanks to Mesa know-how
M2 Prosthetic Screw: strong and secure, a guarantee for the connection
Machined Collar 0.3: for crestal but also sub-crestal placement
SLA Surface: the most widespread, the most tested, the safest
Atraumatic Apex: safeguards adjacent anatomical structures
Implant body taper angle: 24°

WARNINGS

Safety instructions for placement of IGEA System implants:

Insertion torque: 45 Ncm (do not exceed). Value applicable to all Narrow, Regular and Short diameters.

Crestal placement and sub-crestal supported thanks to the 0.3 machined collar. The atraumatic apex safeguards adjacent anatomical structures.

IGEA Short Implants: safe placement even in delicate and at-risk anatomical areas where bone is insufficient for insertion of traditional implants. Insertion torque: 45 Ncm.

FREQUENTLY ASKED QUESTIONS

What diameters are available for IGEA implants?

IGEA System implants are available in four Narrow/Regular diameters (3.5 Narrow, 3.8 Regular, 4.3 Regular, 5.0 Regular) with lengths from 8 to 15 mm, plus the IGEA Short line with 6.5 mm length in diameters 3.8 Narrow, 4.3 Regular and 5.0 Regular.

What insertion torque for IGEA implants?

The recommended insertion torque is 45 Ncm, not to be exceeded. This value applies to all diameters (Narrow, Regular and Short) to ensure primary stability without compromising the integrity of the implant and peri-implant tissues.

What does SLA mean?

SLA stands for Sandblasting and Acid Etching. It is the surface treatment performed on Mesa Igea implants: a sandblasting process followed by acid etching that increases the contact surface and promotes osteoblastic cell differentiation, guaranteeing optimal and uniform micro-roughness for rapid osseointegration.

What is the difference between Narrow and Regular?

IGEA Narrow implants have a 3.5 mm diameter and are recommended for anterior areas, where space and anatomy require a reduced diameter. Regular implants cover diameters from 3.8 to 5.0 mm, indicated for posterior areas and for cases requiring greater loading surface.

When to use Short implants?

IGEA Short implants (6.5 mm length) are used when bone is insufficient for insertion of traditional implants. They simplify the surgical procedure by reducing times, limit invasiveness by avoiding bone grafting procedures and preserve vital structures, allowing safe placement even in delicate and at-risk anatomical areas.

COMPLIANCE AND CERTIFICATIONS

CE 0425
ISO 13485
ISO 9001
ASTM F67

Titanium Grade 4 implants compliant with ASTM F67. Manufactured under ISO 13485 (medical devices) and ISO 9001 quality system. CE 0425 marking. Compliance documentation available for client audit.

READY FOR AN ASSESSMENT?

Request the complete datasheet, the IGEA catalog or a direct technical consultation. Mesa team responds within 48 business hours.

META & SOURCE (REF only)

Slug	`impianti-sistema-igea-ref`
URL	https://mesaitalia.it/en/igea-implant-system-titanium-grade-4-eng/
Title	IGEA Implant System – Titanium Grade 4 \| Mesa Italia
Canonical page	live
Products indexed	23 article codes (20 Narrow/Regular + 3 Short)
REF version	v3-mesa-classes (S45-17-05)
Design system	mesa-event-* (aligned to events/home leitmotiv)
Schemas	Product (JSON-LD inline) + FAQPage (JSON-LD inline)
Robots	noindex, nofollow, noarchive
Source	Mesa_Italia_IGEA_Contenuti_Pagine_Prodotto_v2.md, section 2 (rows 150-261)