The IGEA Surgical Kit (Box Code: 41530000A) is the complete system of instruments for implant site preparation and insertion of IGEA line implants. It was born from the need to offer the surgeon an autoclavable, ergonomic and step-by-step guided kit, in which each instrument is arranged according to the steps of the surgical protocol.

Autoclavable box in impact-resistant thermo-plastic material, sterilizable in autoclave. The silicone instrument holders ensure secure retention even during transport and sterilization. The inserts are color-coded by implant diameter and the laser-etched symbols allow optimal orientation.

All instruments, including the box, must be cleaned and sterilized before use; for sterilization guidelines consult the instructions for use.

The kit contains the complete map of IGEA surgical instruments:

• Short shaped burs (ø2.9 / ø3.2 / ø3.7 / ø4.4)
• Long shaped burs (ø2.9 / ø3.2 / ø3.7 / ø4.4)
• Dense burs / Taps (ø3.5 / ø3.8 / ø4.3 / ø5.0)
• 6 Drill Stops (6.8 / 8.3 / 10.3 / 11.8 / 13.3 / 15.3 mm) in Titanium Grade 23
• Ratchet with lever
• Depth gauge (internal area) in Titanium Grade 23
• Parallelism pins (2 straight / 17° / 30°) in Titanium Grade 23
• Manual and ratchet screwdrivers (short/long)
• Extension and ratchet adapter
• Universal screwdrivers (short/long)
• MUA positioner
• Bone profiler guide screws
• Bone Profiler (ø4.3 / ø5.0 / ø6.0)
• Manual MUA mounter, manual and ratchet mounter (short/long)
• Universal MUA mounter, motor mounter
• Lanceolate bur and pilot bur

High-precision medical stainless steel. Instruments designed to ensure precision, safety and maximum efficacy in every phase of the IGEA implant surgical protocol.

Lanceolate Bur

Bur for osteotomy to be used to incise the cortical bone and create the entry point for subsequent use of the pilot bur. Speed: 600-800 rpm

Pilot Burs

Bur that allows execution of a calibrated osteotomy, creating a minimum diameter hole in the maxilla or mandible, with the support of the depth notches present. For long pilot burs, drill stops are also available. Speed: 600-800 rpm

Short Shaped Burs

The shaped bur is a conical bur designed to be used in the final steps of implant site preparation. The markings present on the bur body indicate the depth relative to the bone level. The color code helps the operator associate bur diameters with the implant diameters of the IGEA implant line. Speed: 600-800 rpm

Long Shaped Burs

Same function as the short ones. The burs can be used in combination with the stops that prevent the surgeon from sinking into the bone beyond the limit indicated by the stop itself. Speed: 600-800 rpm

All instruments are self-washing and made of high-quality medical stainless steel. Available for Narrow (N) and Regular (R).

Dense Burs (Taps) – Medical Stainless Steel

Surgical instrument used to create the threading inside the bone and assist the self-tapping action of the implant. Its function is to prepare the implant site calibrated for insertion of the implant it is intended for. Use is recommended for implant placement in compact bone. Speed: 600 rpm

Surgical instrument designed to level the bone crest around the implant in order to create the necessary space for correct seating of the prosthetic component. Speed: ≤100 rpm

Guide Screw (for Bone Profiler)

It is used in combination with the Bone Profiler to ensure its optimal use. Codes: SST-0063, SST-0064

Features: medical stainless steel (high corrosion resistance and guaranteed biocompatibility), high precision (precision machining for optimal control of preparation), certified quality (certified materials and processes to ensure consistent and safe performance). Available for Narrow and Regular.

The Mounter with bur attachment for implant is a surgical instrument designed to allow insertion of the dental implant into the bone site.

Motor Mounter

Manual and Ratchet Mounter

The engagement of the Mounter is considered complete only when the conical part is no longer visible.

Osteotomy depth: control of the depth of the implant site level.

Available markings: 8 mm, 10 mm, 11.5 mm, 13 mm, 15 mm.

Code: SST-1004

Advantages: depth control (allows precise verification of osteotomy depth), immediate reading (crisp laser markings for clear and safe reading), greater safety (improves predictability of clinical outcome and implant stability).

The surgical protocol for the Igea implant has been developed to provide surgeons with indications on how to choose the most suitable instruments for implant site preparation depending on the type of bone. However, it is the surgeon’s responsibility to apply the most appropriate protocol based on their own experience.

All burs and taps are made of medical-grade stainless steel. The surgical bur line is complete and easy to use. All MESA IGEA implant diameters share the lanceolate bur and pilot bur; specific shaped burs are then provided based on the implant diameter.

The bur-implant GAP is 0.3 mm.

Features and advantages: Each shaped bur has depth bands highlighted in chromatic contrast and color code for better identification.

Bur-Implant Sequences by Diameter

To maintain the desired insertion torque, in dense bone, the use of the tap is recommended, at a maximum speed of 20 rpm and only with the diameter corresponding to the width of the implant bed.

Bur Speeds

For each type of bur, tap and bone profiler, it is recommended to follow the specific indications noted in the relative descriptions. Perform all drilling with a vertical back-and-forth movement accompanied by abundant external irrigation in order to minimize heat production and preserve bone vitality. Do not perform a back-and-forth movement during tapping.

Bur Lifespan

Do not use burs that are damaged, not sharp or for more than 20 applications, in order to reduce risks of overheating or bone trauma that could compromise the osseointegration process.

Open Transfer

For open transfer the impression must be taken with the open tray technique or with an individual impression tray. Non-sterile. Torque: 10 Ncm

Open Transfer Screw: SCR-1405 (L19, M1.6), SCR-1413 (L24, M1.6), SCR-1406 (L19, M2), SCR-1414 (L24, M2).

Closed Transfer

For closed transfer the impression must be taken with the closed tray technique or with a closed impression tray. Non-sterile. Torque: 10 Ncm

Closed Transfer Screw: SCR-1408 (L16, M1.6), SCR-1409 (L16, M2).